CHV100 Close Loop Vector Control Inverter

CHV100

Product Description:

 ● Input & Output
  - Input  Voltage Range:      1140/690/380/220V±15%
  - Input  Frequency Range:   47~63Hz 
  - Output  Voltage Range:     0~rated input voltage
  - Output  Frequency Range:  0~600Hz
 ● Main Control Function
  - Control Mode: Sensorless vector control (SVC), Vector control with PG (VC), V/F control.
  - Overload Capacity: 60s with 150% of rated current, 10s with 180% of rated current.
  - Starting Torque: 150% of rated torque at 0.5Hz (SVC); 
    180% of rated torque at 0Hz(VC).  
  - Speed Adjusting Range: 1:100 (SVC); 1:1000 (VC)
  - Speed Accuracy: ± 0.5% of maximum speed (SVC); ± 0.02% of maximum speed (VC)
  - Carrier Frequency: 1.0kHz~16.0kHz. 
  - Frequency reference source: keypad, analog input, HDI, serial communication, multi-step speed, simple PLC and PID. The combination of multi- modes and the switch between different modes can be realized.
  - Torque Control Function: Provide multiple torque setting source.
  - PID Control Function
  - Simple PLC or Multi-steps Speed Control: 16 steps speed can be set.
  - Traverse Control Function
  - Length and Time Control
  - Non-Stop Function while instantaneous power failure
  - Speed Trace Function: Smoothly start the running motor.
  - QUICK/JOG Function: User defined shortcut key can be realized.
  - Automatic Voltage Regulation (AVR): Automatically keep the output voltage stable when input voltage fluctuating
  - Up to 29 fault protections: Protect from over current, over voltage, under voltage, over temperature, phase failure, over load etc.
 ● I/O Features
  - Programmable Digital Input: Provide 5 terminals which can accept ON-OFF inputs, and 1 terminal which can accept high speed pulse input (HDI1). 4 inputs can be extended by I/O extension card.
  - Programmable Analog Input: AI1 can accept input of 0 ~10V, AI2 can accept input of 0~10V or 0~20mA. AI3 (-10V~10V) and AI4 (0~10V or 0~20mA) can be extended by I/O extension card.
  - Programmable Open Collector Output: Provide 1 output terminal. 1 output (open collector output or high speed pulse output) can be extended by I/O extension card.
  - Relay Output: Provide 2 output terminals. 1 output can be extended by I/O extension card.
  - Analog Output: Provide 1 output terminal, whose output scope can be 0/4~20 mA or 0~10 V, as chosen. 1 AO (0/4~20mA or 0/2~10V) can be extended by I/O card.

Ứng dụng

- Printing machine, dying machine, paper machine, wind and unwind, high accuracy machine tool, cutting machine. steel rolling, metal, wire machine, drawbench, position control, zero speed servo control.

Liên hệ